Missouri homeowner guide

Seasonal Home Maintenance

A simple checklist for protecting your home through heat, humidity, thunderstorms, leaves, freezing temperatures, ice, and snow.

Find a service provider

March–May

Spring

Recover from winter and prepare for Missouri rain and storms.

  • Schedule air-conditioning service and replace the HVAC filter.
  • Inspect the roof, flashing, siding, chimney, and exterior caulk for winter damage.
  • Clean gutters and downspouts; confirm water drains away from the foundation.
  • Test the sump pump and check the backup power source, if present.
  • Turn exterior faucets on slowly and check for freeze damage or leaks.
  • Inspect decks, patios, fences, and exterior steps for loose or damaged areas.
  • Check window screens and clean dryer and bathroom exhaust vents.
  • Trim branches away from the roof and service lawn equipment.

June–August

Summer

Keep the home cool, manage moisture, and watch for storm damage.

  • Replace or clean the HVAC filter and keep the outdoor unit free of debris.
  • Check the basement and lower level for moisture, odors, or seepage after heavy rain.
  • Inspect irrigation systems and hoses for leaks; water foundations and landscaping appropriately during dry periods.
  • Look for peeling paint, failed exterior caulk, and signs of wood rot.
  • Clean refrigerator coils and inspect appliance water-supply lines.
  • Check for insects, termites, and gaps around doors, windows, and utility openings.
  • Review deck and pool safety, including gates, railings, alarms, and stored chemicals.
  • After major storms, visually check the roof, gutters, trees, and siding from the ground.

September–November

Fall

Prepare heating, plumbing, and outdoor areas before freezing weather.

  • Schedule furnace service and replace the HVAC filter.
  • Clean gutters after leaves fall and verify downspout extensions remain connected.
  • Disconnect garden hoses, shut off exterior water when applicable, and protect outdoor faucets.
  • Check weatherstripping, exterior caulk, and door sweeps for drafts.
  • Have fireplaces, chimneys, and fuel-burning appliances inspected as appropriate.
  • Test smoke and carbon-monoxide alarms and replace batteries when needed.
  • Drain or winterize irrigation systems and outdoor equipment.
  • Stock ice melt, snow tools, flashlights, batteries, and basic emergency supplies.

December–February

Winter

Prevent frozen pipes, monitor heating, and respond quickly to ice and snow.

  • Keep the thermostat at a safe, consistent temperature, including while traveling.
  • Know the location of the main water shutoff and keep access clear.
  • During extreme cold, protect vulnerable pipes and open sink cabinets where appropriate.
  • Check the HVAC filter monthly and keep vents and exterior exhaust openings clear.
  • Use ice melt carefully and keep walkways, steps, and handrails safe.
  • Remove snow with care; avoid climbing onto icy roofs or ladders.
  • Look for ice dams, ceiling stains, condensation, or other signs of water intrusion.
  • Confirm emergency contacts and review insurance coverage before severe weather.

Every month

Five quick checks

  • Test smoke and carbon-monoxide alarms.
  • Check HVAC filters and replace as needed.
  • Look under sinks and around toilets, water heaters, and appliances for leaks.
  • Check fire extinguishers and keep exits unobstructed.
  • Walk around the exterior and note drainage, roof, tree, or pest concerns.

Before severe weather

Charge devices, secure outdoor items, check flashlights, know where to shelter, and monitor trusted weather alerts. After a storm, avoid downed lines, standing water, unstable trees, and damaged structures.

Never run a generator, grill, or fuel-burning appliance inside a home, garage, basement, or enclosed area.

Use this guide as a reminder—not a substitute for professional advice.

Homes, equipment, warranties, and local requirements differ. Hire qualified professionals for roofing, electrical, gas, structural, HVAC, chimney, pest, and other work that requires specialized training. Follow manufacturer instructions and local codes.